In the last post we talked about just how fast, easy and economical it is to replace your broken driver side mirror glass or broken passenger side mirror glass yourself, rather than having the dealership replace the entire mirror head assembly. We went through the steps and realized that replacing your broken side mirror is a truly worthwhile project, and anything but intimidating, difficult or time consuming… But I know what you’re thinking… You’re thinking, “Sure it’s easy to replace a non-heated, non-signal glass, but my mirrors are heated with a turn signal. There’s electrical components involved! That’s got to be harder… Right?“ Well guess what? Replacing a broken heated signal mirror with one of our RSG (Redi-Set-Go) mirrors from Burco® is actually easier than replacing a broken side mirror with a Burco® Redi Cut! You don’t believe me? Below I have listed the steps along with a simple diagram for replacing a broken side mirror with a one of our RSG (Redi-Set-Go) mirrors from Burco®.

Step by Step instructions for replacing a broken side mirror with a one of our RSG (Redi-Set-Go) mirrors from Burco®.

1. Remove broken mirror along with the backing plate. If mirror is heated or signal type, disconnect terminal leads. (Tip: Use a small piece of cardboard or other solid item on edge of mirror head when prying off backing plate to prevent causing damage.)
2. Throw away backing plate and broken mirror glass.
3. If heated or signal type auto mirror glass, reconnect terminal wires to new Burco® Redi Set Go mirror glass
4. Align and snap in the new Burco® Redi Set Go mirror glass. Done.

And that’s that! Couldn’t be easier right?If you have any questions, as always we value your feedback, you can contact us via e-mail from the “Contact” link at the top of the page, or if you prefer to call us we are here to answer your questions Monday through Friday 9 AM/CST – 5 PM/CST toll free at 1-888-482-2279!