|
|
|
 |
Burco® Fit Over Replacement Automotive Mirror Glass |
 |
|
 |
>> Burco® Fit Over (Including Electrochromic Self-Dimming) Installation Instructions
The mirror glass is encased or bonded to the inner backing plate which is mounted inside the mirror head.
- The broken mirror is to remain in the backing plate, but loose pieces should be removed.
- Dry fit (test fit) Burco® Fit Over
replacement mirror glass in opening to check proper fit.
- Carefully clean broken mirror surface with Burco® Window Glo or other urethane-safe glass
cleaner.
- Apply Burco® Redi Stick adhesive patches to the back of the replacement mirror and place over the existing
broken mirror. If using a silicone or urethane apply directly to broken mirror surface and clamp assembly until
cured.
- Clean the installed Redi Cut® mirror with Burco® Window Glo or other urethane-safe glass
cleaner.
NOTE: For electrochromic mirror fit-over replacements, the self-dimming feature of the original mirror is
eliminated, but its heat feature remains functional.
|
|
|
