Burco® Inside Snap Ring Replacement Automotive Mirror Glass
>> Burco® Inside Snap Ring Mirror Glass Installation Instructions
If the replacement mirror was designed to fit inside the snap ring, then:
The broken mirror is to remain in the backing plate, but loose pieces should be removed.
Dry fit (test fit) replacement mirror in opening to check proper fit.
Carefully clean broken mirror surface with Burco Window Glo® or other urethane-safe glass
Apply Burco Redi Stick® adhesive patches to the back of the replacement mirror and place over the existing
broken mirror. If using a silicone or urethane apply directly to broken mirror surface and clamp assembly until cured.